Aiwa NSX-V9000 - Manual (Page 8)

RADIO RECEPTION
DSP SURROUND
■SURROUND
The DSP (Digital Signai Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound presence of real environments.
There are three modes with matching graphic equalization
cun/es.
Press the SURROUND button repeatedly until the desired
SURROUND mode is displayed.
'■>DISCO->LIVE^HALL->S-oFF-'
I (cancel)
Equalization curves are selected automatically to match the
SURROUND modes and can also be selected or turned off to
suit your preference.
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DISCO or
HALL is selected, no sound will be heard from the surround
speakers.
To cancel the selected mode
Press the selected button again. S-oFF is displayed.
While SURROUND mode is off, no sound is heard from the
surround speakers.
When a connected microphone is used, the SURROUND mode
is automatically canceled.
7
ENGLISH
MANUAL TUNING
1 Press the TUN
select the desin
If the power is tun
played (Direct PlaV
Press the
a station.
Each time the but(i
When a station is
During FM stereo
1 r” 1
oo o
ooo<»- ■
oooo
oooo
oooo
oooo
o
i
ODO o
[ quqq J
p cpj
) i :
■ REPEAT/
MONO
TUNER
ER/BAND button repeatedly to
ed band.
FM- AM
tfied off, the previously tuned station will be
Function).
DOWN or UP button to select
on is pressed, the frequency changes,
rfeceived, “TUNE” is displayed for2 seconds,
reception, {(ic®)l) is displayed.
1*1
To search for a stat
Keep the DOWff
starts searching for
search stops.
To stop the Auto Seai|(
UP button.
• The Auto Search
signals.
ch manually, press the DOWN or I
tinay not stop at stations with very weak
When an FM stereo
Press the REPEAT/M
so that “MONO” appir
Noise is reduced, alth
*
:ion quickly (Auto Search)
or UP button pressed until the tuner
station. After tuning in to a station, the
broadcast contains noise
ONO TUNER button on the remote control
ars on the display.
ough reception is monaural.
MONO
To restore stereo reqeption, press the button so that MONO
disappears.
To change the AM
The default setting of
you use this unit in an
is 9 kHz/step, changé
Press the POWER
button.
To reset the interval
tuning interval
the AM tuning interval is 10 kHz/step. If
area where the frequency allocation system
the tuning interval.
button while pressing the TUNER/BAND
When the AM tuning .
“PRESETTING STA-fjl
have to be set again
'epeat this procedure.
ipterval is changed, all preset stations (see
ONS”) are cleared. The preset stations