Note, Recoil starter handle (model 390 only), Gear shift lever – Bolens 132-395A User Manual
Page 12: Figure 21. three speed transmission, Mower lift and disengagement lever, Lift disengageme lever, B_ a 1 2 t 3, I w • x
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NOTE
The clutch pedal must be depressed
to start the engine.
FIGURE 19.
RECOIL STARTER HANDLE
(Model 390 Only)
The recoil starter handle is located on the right
side of the dashboard. The recoil starter handle
can either be pulled while seated on the rider or
pulled while standing behind the rider. The igni
tion key must be on before the engine will start.
After the engine starts, the recoil starter handle
must be returned and locked into the dashboard
before the blade or clutch are engaged. The
engine will stop if these instructions are not
followed. See figure 20.
I Starter Handle
GEAR SHIFT LEVER
Three Speed—The three speed transmission has
three forward speeds, neutral and reverse. The
clutch pedal must be depressed to shift gears. It
may be necessary to release the clutch pedal
slightly to shift the gear shift lever. Do not force
the shift lever.
1st Gear—Heavy Cutting
2nd Gear—Medium Cutting
3rd Gear—Medium Cutting
N—Neutral
R—Reverse
See figures 17 and 21.
B_ A 1
2 T 3
FIGURE 21. THREE SPEED TRANSMISSION
MOWER LIFT AND DISENGAGEMENT LEVER
The lift and disengagement lever is used to raise
the cutting deck. Pulling it all the way back and
locking it disengages the blade.
NOTE
The lift and disengagement lever
must be in the disengaged position
when starting the engine and when
shifting into reverse. See figure 22.
Is’J
I W
• X
/
4-^J
f
Lift Disengageme
Lever
FIGURE 20.
FIGURE 22.
12