Bolens 390 User Manual
Guide
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
owiers
GUIDE
• ASSEMBLY • OPERATION • MAINTENANCE •
Made
Made
in
AMERICA
WARNING:
This unit is equipped with an internal combustion engine and should not be used
on or near any unimproved forest-covered, brush-covered or grass-covered land unless the
engine’s exhaust system is equipped with a spark arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it should be maintained in effective working order by
the operator.
In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A
spark arrester for the muffler is available through your nearest engine authorized service
dealer or contact the service department, RO. Box 368022, Cleveland, Ohio 44136-9722.
FORM NO. 770-8576M
Document Outline
- owiers GUIDE
- TOOLS REQUIRED FOR ASSEMBLY
- REMOVING UNIT FROM CARTON
- AHACHING THE TAILPIECE AND DEPTH STAKE
- AHACHING THE HANDLE ASSEMBLY
- AHACHING THE CLUTCH CONTROL CABLE(S)
- REVERSE CABLE (Model 390 Only)
- FINAL CLUTCH ADJUSTMENT
- THROHLE CONTROL
- CHOKE LEVER
- FORWARD TINE ENGAGEMENT HANDLE
- REVERSE TINE DRIVE CLUTCH LEVER (Model 390 Only)
- DEPTH STAKE
- GAS AND OIL FILL-UP
- TO START ENGINE
- TO STOP ENGINE
- HOW TO USE YOUR TILLER
- WHEEL POSITION
- TRANSPORTING THE TILLER
- CULTIVATING
- WHEEL ADJUSTMENTS
- DEPTH STAKE ADJUSTMENT
- TINE WIDTH ADJUSTMENT
- CLUTCH CONTROL ADJUSTMENTS
- CARBURETOR ADJUSTMENT
- TROUBLE SHOOTING
- ENGINE
- CLEANING THE TINE AREA
- BELT REMOVAL AND REPLACEMENT
- TILLER
- Call 1-
- 800-800-7310