Ariens 924 - Manual (Page 12)

Handlebars and Controls
1. Key
2. Stiffener
3. Wire
4. Nut
5. Washer
6. Lower Handlebar
7. Carriage Bolt 5/16-18 x 1-1/2
8. Key Switch
9. Key Switch Nut
10. Cap Screw
11. Carriage Bolt 1/4-20 x 1-1/2
12. Lock Nut
Figure 2-3: Handlebar Assembly
2.1 Upper Handlebar Panel and Key Switch
Disconnect wires to key switch.
Remove key switch nut and remove key switch from
upper handlebar panel.
Remove (4) nuts and bolts on each side of handlebar
panel plus the bolt, nut and washer in center of
cross piece of upper handle bar and remove panel
stiffeners and upper handlebar.
Check parts for wear or replacement.
Assemble, using reverse procedure.
2.2 Lower Handlebar
Remove nut and washer attaching lower handlebar
to each side of frame and remove lower handlebar.
Check parts for wear or replacement.
Assemble, using reverse procedure.
2-4