Sears KENMORE 385.1915 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Set Up the Machine
' Plug in the IVIaDhina and Switch on the Power
on the rnachine conform to your eiectrica! power.
Turn off the power switch, and insert the foot control plug (T) machine plug
(D and power supply plug @ in this order.
For Your Safety
* *
1. While in operation, always keep your eye on the sewing area, and do not
touch any moving parts such as the thread take-up lever, balance wheel or
needle,
2. Always turn off the power switch, and unplug from the power supply:
« Whan leaving the machine unattended.
» When attaching or removing parts,
* When cleaning the machine.
3. Do not place anytfiing on the foot control, except in use.
display automatically.
Store the power supply cord
Power supply cord can be stored in extension table as shown.