Sewf a button, Sew a button – Sears KENMORE 385.1915 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 4.
practice
COMiVlON STITCHING SKILLS
Sewf a Button
2
.
3.
4.
the presser foot.
Lower the toot to hold the button in place.
Turn the hand wheel by hand until the needle
point IS just above the button.
Press the stitch width button (+ or —| so the
needle will enter the left hole of the button.
6
.
7.
Stitch several times.
After you finish sewing, cut the thread but leave
3 to 4 inches of thread at the button.
Draw the thread to the reverse side of the fabric
and knot the threads.
When sewing the button is completed, raise the feed
dogs tor normal sewing.
35