Sand stitch 38 – Sears KENMORE 385.1915 User Manual

Page 87

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 5. LEARN THE STITCHES

Sand Stitch 38

The sand stitch fills in outlined embroidery
designs.

1. Outline the pattern with a Satin Stitch

Set stitch width at "1.5"=
Set stitch length at "0.3" or as you

desire.

2. Fill in the design with the sand stitch.

3. Decrease the stitch width to fill in small

spaces.

4. Sew in rows, starting at the edge, until

the pattern is filled in.