Sears KENMORE 385.1915 - Manual (Page 72)

SECTION B. LEARN THE STITCHES
JT;'- :
® Stitch Density on One Side
@ Press the memory button.
The machine will bartack and sew
down the right side.
Stop the machine when you are
directly opposite the first stitch
on the (eft hand side.
I
□ STEP 3
(D Press the memory button.
The machine will auto-lock the end
of the buttonhole and stop. Keep
the foot control depressed until
the machine stops by rtself.
For Condition A:
Left Side Stitches too Far Apart
isea above).
Turn the feed balance dial slightly
toward Use the large screw
driver in your accessory box.
For Condition B:
Right Side Stitches too Far Apart
(see above). i
Turn the feed balance dial slightly
toward
After adjusting the feed balance dial, sew another test buttonhole to be sure
your adjustment is correct.
NOTE: Remember to return the feed balance dial to the standard mark { E> }
when you have completed the buttonholes.
70