Sears KENMORE 385.1915 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Set Up the lyiachine {Continued)
o Check the Feed Balance Dial
• Set the Pressure Adjustirrg Leser
Buttonholes iSee p. 70 for details!.
Any "stretch" stitch such as patterns
when sewsng on special fabrics.
NOTE; The foot control is sensitive and will increase
or decrease your sewing speed immediately.
Practice on a scrap ot fabric to regulate your
sewing speed to your taste and needs.
OPERATING INSTRUCTIONS
"For appliances with a polarized plug {one blade wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outiet,
reverse the plug, if it still does not fit, contact a qualified electrician
to install the proper outlet. Do not modify the plug in any way."
"Fool Controller Model 21371 or YC-542 for use with Sewing Machine Models
385. 19150000 through 385. 19150999 and 385. 19153690."
8 (For U.S.A. market only)
with a lot of stretch may also require a "1" setting.
0 . - .. basting, manual darning and embroidery.
and monogramming