Main function of buttons – Sears KENMORE 385.1915 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SECTION 3. LEARN TO USE THE CONTROLS

Main Function of Buttons

• Reverse Stttch Button

® Auto-Lock Button

o Up/Down Needle Position Button

---- secure seams.
— reinforce the seams and the top

edges of pockets;

At Straight Stitching, Zigzag Stitching

( I ! and Mending Stitchmg i | ).

Press and hold the reverse stitch
button.
The machine will sew m reverse until
you release the button.

i and Mending Stitching i

Tlie machine will take a few stitches in
place and stop automatically.

At Utility
Stitching and Decorative Stitching:

Press this button running the machine

then the machine will sew auto-lock
stttch at the end of pattern and stops

automatically.

will go tip or down,

it the needle is up and you press this

button, the needle will go down to its
lowest position.

If the needle is down and you press

this button, the needle wiil go.to its
highest position.

At Utility
Stitching and Decorative Stitching:

Press this button, then the machine
will sew auto-lock stitch immediately
and stops automatically.