Fut in a zipper (continued) – Sears KENMORE 385.1915 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fut in a Zipper (Continued)

SECTION -4. PRACTICE COMMON STiTCHING SKILLS

Zipper teeth

Zipper tape

C. Sew in the zipper.

1. Fold back the left seam allowance as

shown.

2. Turn under the right seam aîiowance to

form a 1/8" fold,

3. Place the zipper teeth next to the 1/8"

fold and pin in place.

NOTÉ: Be sure the top of the zipper (the

slider) is at the top of the garment.

5. Lower the zipper foot on the top side at

the bottom of the zipper so that the needle
pierces the fold and the zipper tape,

6. Sew through the fold and the zipper tape

to the point where the slider begins.

7. Lower the needle to hold the fabric and

raise the presser foot

Lower the presser foot and stitch the

rest of the seam.