Sears KENMORE 385.1915 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE YOUR MACHÍNE FOR SEWING
@
-fhi» Rrihhin
0 Guide the thread around the thread guide.
(D Thread through the hole in the bobbin from the inside to the outside.
(D Put the bobbin on the bobbin winder spindle, and push it to the right. With the free end ot the thread held in your hand, depress the foot control.
Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin.
@ Depress the foot control again. When the bobbin is fully wound, it will stop automatically.
(S) Return the bobbin winder to its original position by moving the spindle to the left, and cut the thread as shown.
19