Viconics VT7606E Installation Manual - Manual (Page 9)

9
| PIR Ready VT7600 Series-Installation Guide
028-0363-02
S2020E1000; outdoor air temperature sensor
This sensor can be used for:
• Outside air temperature sensing with the sensor installed directly exposed to the
elements.
• Sensor uses a water resistant NEMA 4 ABS enclosure for outdoor applications.
WIRING S2000D1000, S2060A1000 and S2020E1000
Remote wiring 1 sensor Remote wiring 4 sensors
c
onfIguratIon and
s
tatus
d
Isplay
I
nstructIons
Status display
The Terminal Equipment Controller features a two-line, eight-character display. There
is a low backlight level that is always active and can only be seen at night.
When left unattended, the Terminal Equipment Controller has an auto scrolling display
that shows the current status of the system.
Each item is scrolled sequentially with the back lighting in low level mode. Pressing
any key will cause the back lighting to come on to high level.
Manual scrolling of each menu item is achieved by pressing the Yes (scroll) key
repetitively. The last item viewed will be shown on the display for 30 seconds before
returning to automatic scrolling. Temperature is automatically updated when scrolling
is held.
Sequence of auto-scroll status display:
CLOCK
STATUS
SYSTEM
MODE
SCHEDULE
STATUS
OUTDOOR
TEMPERATURE
ALARMS
Monday
12:00 AM
Sys mode
auto
Occupied
Outdoor
x.x °C or °F
Frost ON
Sys mode
off
Occupied Hold SetClock
Sys mode
heat
Unoccup DAS alarm
Sys mode
cool
FA alarm
High CO
2