Viconics VT7606E Installation Manual - Manual (Page 14)

14
| PIR Ready VT7600 Series-Installation Guide
028-0363-02
E) Fan mode setting
Fan mode
set Y/N
This section of the menu is permits the setting of the fan mode operation.
Use ▲▼ to set value, Yes key to confirm.
Fan mode
On
On fan mode
Fan is on continuously, even when system mode is OFF.
Fan mode
Auto
Automatic fan mode
Fan cycles on a call for heating or cooling for both occupied & unoc-
cupied periods.
Fan mode
Smart
Smart fan mode
During occupied periods, fan is on continuously. In unoccupied
mode, fan cycles on a call for heating or cooling.
This selection is available on all models with a communication mod-
ule, on all stand-alone (Network Ready) scheduling models or if DI1
or DI2 is set to RemNSB on stand-alone non-scheduling models.
F) Schedule set (2 events)
Scheduling can have 2 or 4 events per day. This is set in the configuration menu as
per parameter (2/4 event)
Schedule
set Y/N
This section of the menu permits the user to set the whether 2 or 4 events is needed.
Each day can be tailored to specific schedules if needed.
• 2 events can be scheduled per day.
• Occupied and unoccupied periods can be set for each day.
Monday timer
Schedule set
Tuesday timer
Schedule set
Wednesday timer
Schedule set
Other days are
identical
Monday
set? Y/N
No next →
Yes down ↓
Tuesday
set? Y/N
No next →
Yes down ↓
Wednesda
set? Y/N
No next →
Yes down ↓
Selects the day to be pro-
grammed
or modified
Yes key to access day scheduling, No key to jump to next day
Occupied
Day? Y/N
No next →
Yes down ↓
Occupied
Day? Y/N
No next →
Yes down ↓
Occupied
Day? Y/N
No next →
Yes down ↓
Yes = Daily schedules will be
accessed
No = Unoccupied mode
all day
Yes key to access day scheduling, No key to jump to next day
Copy Y/N
Previous
Yes next →
No down ↓
Copy Y/N
Previous
Yes next →
No down ↓
Yes = Will copy previous day
schedule
No = Daily schedules will be
accessed
Yes key to copy previous day, No key to set new time value for each day
Occupied
00:00 AM
Use ▲▼
To set value
Occupied
00:00 AM
Use ▲▼
To set value
Occupied
00:00 AM
Use ▲▼
To set value
Sets Event # 1 Occupied time
Will activate occupied
setpoints
Use ▲▼ to set value, Yes key to confirm
Unoccup
00:00 AM
Use ▲▼
To set value
Unoccup
00:00 AM
Use ▲▼
To set value
Unoccup
00:00 AM
Use ▲▼
To set value
Sets Event # 2 Unoccupied
time
Will activate unoccupied
setpoints
Use ▲▼ to set value, Yes key to confirm