Viconics VT7606E Installation Manual User Manual
Page 33
33
| PIR Ready VT7600 Series-Installation Guide
028-0363-02
s
pecIfIcatIons
Terminal Equipment Controller power requirements: 19-30 VAC 50 or 60 Hz; 2 VA Class 2
Operating conditions:
0 °C to 50 °C (32 °F to 122 °F)
0% to 95% R.H. non-condensing
Storage conditions:
-30 °C to 50 °C (-22 °F to 122 °F)
0% to 95% R.H. non-condensing
Sensor:
Local 10 K NTC thermistor
Resolution:
± 0.1 °C (± 0.2 °F)
Temperature control accuracy:
± 0.5 ° C (± 0.9 °F) @ 21 °C (70 °F)
typical calibrated
Contact output rating:
Relay output: 30 VAC, 1 Amp.
Maximum, 3 Amp. In-rush.
Occ, Stand-By and Unocc cooling setpoint range:
12.0 to 37.5 °C (54 to 100 °F)
Occ, Stand-By and Unocc heating setpoint range: 4.5 °C to 32 °C (40 °F to 90 °F)
Room and outdoor air temperature display range:
-40 °C to 50 °C (-40 °F to 122 °F)
Proportional band for room temperature control:
Factory default: Cooling & Heating:
1.8°C (3.2°F)-(Adjustable)
CO
2
and airflow analog inputs:
0 to 10 VDC input across Scom, AI1
and AI2.
Analog heat & economizer analog outputs rating:
0-10 VDC into 2KW resistance min.
Analog heat & economizer analog output accuracy:
± 3% typical
Wire gauge:
18 gauge maximum, 22 gauge
Approximate shipping weight:
0.75 lb ( 0.34 kg )
Agency Approvals all models:
UL: UL 873 (US) and CSA C22.2 No.
24 (Canada), File E27734 with CCN
XAPX (US) and XAPX7 (Canada)
Industry Canada: ICES-003
(Canada)
Agency Approvals all models:
FCC: Compliant to CFR 47, Part 15,
Subpart B, Class A (US)
CE : EMC Directive 89/336/EEC
(Europe Union)
C-Tick: AS/NZS CISPR 22 Compli-
ant (Australia / New Zealand) Sup-
plier Code Number N10696
Agency Approvals Wireless models:
FCC: Compliant to: Part 15, Subpart
B
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT
CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Please check with your local government for instruction on disposal of this product.