Viconics VT7606E Installation Manual - Manual (Page 18)

18
| PIR Ready VT7600 Series-Installation Guide
028-0363-02
H) Clock/Day Settings
Clock
set Y/N
This section of the menu permits the user to set the time and day.
Time setting Day setting Time format setting
Time
set? Y/N
No next →
Yes down
↓
Day
set? Y/N
No next →
Yes down
↓
12/24hrs
set? Y/N
No = exit
Yes down ↓
Time
0:00
Use ▲▼
To set value
Day
Monday
Use ▲▼
To set value
12/24hrs
12 hrs
Use ▲▼
To set value
I) Schedule hold
Schedule
hold Y/N
• This menu will only appear on stand-alone (Network Ready) Terminal Equipment
Controller, i.e. without a BACnet® Echelon® module.
• This section of the menu permits the user to set a permanent schedule hold, which
bypasses the internal Terminal Equipment Controller scheduling.
• The permanent schedule hold function is typically used for nonscheduled events
that extend for various periods of time.
• Enabling a permanent occupied or permanent unoccupied schedule hold will can-
cel any active override.
• The use of temporary setpoints during permanent hold is permitted. The duration
of the temporary setpoint is as set per the TOccTime parameter.
• Ex. 3 hours
Use ▲▼ to set value, yes key to confirm