Canon CDI-E075-010 - Manual (Page 98)

92
Changing the ISO Speed
Raise the ISO speed when shooting in dark places or when you want to shoot with
a faster shutter speed. You can choose from the following speeds: Auto, 50, 100,
200 and 400.
1
Press the button to turn the LCD monitor on.
2
Press the button.
3
Select *
(LCD monitor)
or *
(Display Panel)
using the
C or D arrow on the omni
selector.
* The current setting is displayed.
The ISO speed setting menu appears on the LCD
monitor.
4
Select the desired setting using the main
dial or the
B or A arrow on the omni
selector.
You can shoot the image right after selecting settings by pressing the shutter
button. This screen will appear again, once the image is shot.
5
Press the button or click the main dial.
6
Shoot the image.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Higher ISO speeds increase the image noise. To take clean images, use as low an
ISO speed as possible.
• Although the AUTO setting selects the optimal speed, it will automatically raise
the speed when the shooting conditions limits are reached. It will also raise the
speed when the light from the flash is insufficient to illuminate the subject matter.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).