Canon CDI-E075-010 - Manual (Page 176)

170
List of Messages
The following messages may appear on the LCD monitor.
Reset settings to default?: Do you wish to reset all the camera and menu settings
to default?
Resetting: Resetting all the camera and menu settings to default
Busy... : Image is being recorded to, or read from, CF card.
Resetting settings to default.
No memory card: You attempted to shoot or replay images without a CF
card installed.
Cannot record!: You attempted to shoot an image without a CF card
installed.
Memory card error!: CF card has experienced an anomaly.
Memory card full: CF card is too full to save more images or print
settings.
Naming error!: The file could not be created because there is a file with
the same name as the directory that the camera is
attempting to create, or the highest possible file
number has already been reached. In the Rec. menu,
please set [File No.] Reset to [On]. After you save all the
images you wish to retain onto a computer, format the
CF card (p. 131). Please note that formatting will erase
all the existing images and other data.
Change the battery pack: Battery charge is insufficient to operate the camera.
Replace it immediately with a charged battery pack or
recharge it.
No image: No images recorded on CF card.
Image too large: You attempted to replay an image larger than 4064 x
3048 pixels.
Incompatible JPEG format: You attempted to replay an incompatible JPEG file.
Corrupted data: You attempted to replay an image with corrupted data.