Canon CDI-E075-010 - Manual (Page 73)

67
Shooting - Letting the Camera Select Settings
4
Compose and shoot the second image so
that it overlaps the first.
• Minor discrepancies in the overlap can be corrected
with the software.
• An image can be retaken. Press the
B or A arrow
on the omni selector to return to that frame.
5
Use the same procedures to shoot the remaining frames.
A maximum of 26 images can be recorded either horizontally or vertically.
6 Press the button after the last shot.
Sequence
Sequence
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• A custom white balance setting (p. 87) cannot be set in mode. To use a
custom white balance setting, first set it in another shooting mode.
• The settings in place for the first image are locked in and cannot be changed for
subsequent shots.
• A TV cannot be used as the monitor for shooting in this mode.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Functions Available in Each Shooting Mode (p. 208)