Canon CDI-E075-010 - Manual (Page 144)

138
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
When you detach the cable from the camera, hold the plug and do not pull by the
cable.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• On Bubble Jet printers with operation panels, images cannot be printed through
the operation panel while the camera is connected.
• The following operations cannot be performed while the printer is connected.
- Replaying movies
- Setting the language using the
and the button combination.
• When the printer is disconnected, the or symbol will disappear from the LCD
monitor and the camera will revert to standard replay mode.
• Please use the following procedures when you detach the cable from the printer
and the camera.
1. Detach the cable from the printer.
2. Turn off the camera power.
3. Detach the cable from the camera.
Connecting the Camera to a Printer (continued)
To BJ Printer
DIGITAL Terminal
4
Connect the camera and printer using
the connection cable.
• When you insert the cable, make sure the
“Canon” logo on the connection cable faces
the back of the camera (LCD monitor side).
• appears on the camera LCD monitor and the
power/mode indicator is lit green when the
printer is properly connected to the camera.
Connection Cable