Canon CDI-E075-010 - Manual (Page 110)

104
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Once the interval shooting session is started, all operation buttons become
inactive. Turning the mode dial cancels the interval shooting session.
• The lens stays extended until the next image is shot.
• Images are not displayed on the LCD monitor right after being shot.
• Interval shooting is not available when the date and time are not set.
• Continuous Shooting (normal, high-speed) and Self-timer are not available.
• The AEB mode and the Focus-BKT mode settings cannot be set.
• The battery cannot be charged in the camera even if the Compact Power Adapter
CA-560 is connected.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).
5
Press the button.
appears on the LCD monitor and appears on the display panel.
6 Press the shutter button.
• The first image is shot and the interval shooting session starts.
• Once the set number of shots is taken, the camera automatically powers
down regardless of the power-saving function settings.
• If the below operations are accessed while the interval shooting is in process,
the interval shooting session will be cancelled.
– Turning the mode dial while the camera is waiting to shoot the next
image
– Pressing the shutter button halfway while the camera is waiting to shoot
the next image
– Opening the CF card slot/battery cover
– Switching to Replay mode
– Turning off the power
Shooting Images at Set Intervals (Intervalometer) (continued)