Canon CDI-E075-010 - Manual (Page 191)

185
Appendix
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Since the image seen in the viewfinder does not change when a conversion lens is
installed, use the LCD monitor to compose images.
• Please note that the images will not merge properly with the PhotoStitch program
on a computer when they are shot in mode with a conversion or close-up lens.
• To protect the conversion lenses, hold them with one hand while you screw them
on the camera with the other hand.
• Completely remove all dust and dirt from conversion lenses with a lens blower
brush before use. The camera may focus on any dirt that remains.
• Exercise due caution when handling the conversion lenses since it is easy to dirty
them with fingerprints.
Wide-Converter WC-DC58N
mounted
Mounting the Lenses
1
Press the ring release button and
remove the ring from around the lens
on the camera body.
2
Attach the conversion lens adapter so
that its • meets the camera´s • and turn
it in the direction of the arrow.
3 Screw on the lens in the direction of
the arrows.
Ring release
button
Ring