Canon CDI-E075-010 - Manual (Page 161)

155
Connecting
Download images taken with the camera to a computer in one of the following ways:
• Connect the camera to a computer with the USB cable
You can then download images directly from the camera to a computer.
• Directly from the CF card
Using a laptop computer or a card reader, you can download images directly
from the CF card.
Connecting the Camera to a Computer Via the USB Cable
After the software is installed, you can use it to easily download images and print
them or send them by e-mail.
IMPORTANT
You must install the software and driver bundled on the supplied
Canon Digital Camera Solution Disk onto your computer if you are
using any of the following operation systems:
Windows 98 (including Second Edition)/Windows 2000/Windows Me
Mac OS 9.0 or 9.2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The camera will not operate correctly if you connect it to your computer before
installing the driver and software. If this happens, please refer to the Troubleshooting
section of the Software Starter Guide.
1
Install the driver and the software applications bundled on the
Canon Digital Camera Solution Disk.
Please see the Software Starter Guide for information on system requirements
and installation instructions.
2 Connect the supplied USB interface cable to the computer’s
USB port and the camera’s DIGITAL terminal.
• You do not need to turn off the computer or camera when making USB
connection.
• Please refer to your computer manual for information regarding the location
of the USB port.
• The camera’s LCD monitor will blank out when the connection to the
computer is complete and the power/mode indicator will light yellow.
Downloading Images to a Computer