Canon CDI-E075-010 - Manual (Page 142)

136
Connecting the Camera to a Printer
You can make clear prints swiftly and easily when you connect the camera to an
optional direct print function compatible printer (CP series) or a direct print function
compatible Bubble Jet printer (optional). It can also be used with DPOF print
settings.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
You are recommended to use the Compact Power Adapter CA-560 to power the
camera when it is connected to the printer. If you are using a battery pack, ensure
that it is fully charged.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Refer to the System Map included with this camera kit for information on direct
print compatible printers (CP series).
• Please see your printer’s user guide for instructions on loading paper and installing
ink cassettes / tanks.
Connecting to a Direct Print Function Compatible Printer (CP series)
Please use the cable (IFC-300PCU) supplied with the camera.
With the CP-100/CP-10 printer, please use the direct interface cable supplied with
the printer. Two direct interface cables are supplied with the printer. Use the cable
(DIF-100) that has a symbol on the connector to connect to this camera.
1 Turn off the camera (p. 29).
2 Attach the power cable to the printer and plug the other end
into power supply, or, install the printer’s rechargeable battery.
Depending on the type of printer you have, it may or may not use
rechargeable batteries. Refer to your printer’s user guide.
3
Open the LCD monitor.