Canon CDI-E075-010 - Manual (Page 104)

98
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The AE lock function cannot be used when the LCD monitor is off.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• Some settings are not available with certain Shooting modes. Please refer to
Functions Available in Each Shooting Mode (p. 208).
• The automatically selected combinations of shutter speeds and aperture values can
be freely changed without altering the exposure with the following procedures.
1 Turn the mode dial to ,
or .
2 Press the button to turn on the LCD monitor.
3 Focus on the subject on which you wish to lock the exposure.
- Press the shutter button halfway.
4 Press the button.
- The exposure setting will lock and the icon will appear in the LCD monitor.
5 Turn the main dial until the desired shutter speed or aperture value is reached.
6 Recompose the image and shoot.
The setting will cancel after the shot is taken.
Locking the Exposure Setting (AE Lock) (continued)