TeeJet IC18 SPREADER JOB COMPUTER - Manual (Page 9)

5
98-05271 R0 UK
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
ISOBUS Job Computer : IC18 Spreader European
Main Setup Mode
The main setup menu contains six options. Each of these options either directly access settings or additional menus.
Figure 2-7: Main Setup Screen
Home Key
Back One Screen
Up One Selection
Down One Selection
Master Screen Key
Forward One Screen
The table below outlines the additional menus and directs you to the setup pages for further information.
MAIN SETUP MODE MENU STRUCTURE
| | | | | |
Counters Job Parameters Machine User Interface Communication Help
Trip Filling Diagnostic
Campaign Operation About
Total Implement Parameters
Export Counters Pulses per Volume – Calibrations
Implement Speed Sensor Alarm Configurations
OEM
– Sensors
Actuators
Bed Size
User Interface (VT)
Regulator
Configuration
Calibration RPM
Program Modes
Reference Gate Height
Clear total counters
NOTE: Select functions may not be visible due to OEM settings, available
equipment or sensors.
The OEM setup menu is password protected and the settings in this menu are
directly related to the fitted OEM equipment.