Test output, Test pwm dutycycle, Vt data – TeeJet IC18 SPREADER JOB COMPUTER User Manual
Page 24: Tecu, About, Isobus job computer : ic18 spreader european
![background image](/manuals/713551/24/background.png)
20
www.teejet.com
OVER
VIE
W
SE
TUP
APPENDIX
GE
TTING ST
AR
TED
OPER
ATION
ISOBUS Job Computer : IC18 Spreader European
Test Output
Figure 3-33: Test Output
Figure 3-34: VT Data
Figure 3-35: TECU
Figure 3-36: About
Test Output allows the regulation valve to be tested at different percentages of
dutycycle.
Test PWM Dutycycle
Liquid Valve PWM Dutycycle is used to test the regulating valve at different
percentages of dutycycle.
• To set the percentage, use the number pad or slide bar.
• Press the PLUS/MINUS KEYS to test the regulation valve at the
specified dutycycle percentage increase/decrease.
VT Data
The Virtual Terminal (VT) menu provides information regarding the virtual terminal
controller (i.e., address version, etc.).
• If more terminals/controllers are used, switch between these by pressing the
GO TO NEXT VT KEY .
• Press the DELETE OBJECT POOL KEY to force the VT to delete saved
data and upload new information from the IC18 Job Computer on the next
power cycle.
NOTE: Restart the IC18 Job Computer to implement and display changes.
TECU
The TECU is a control unit, residing on the tractor, that performs basic functions
such as power handling, speed info, etc. The TECU data are displayed on this
page.
About
The About screen provides information on the IC18 such as software version, build
number, etc. This information may become useful in case of technical support.