Section 1 introduction, 1 features, Ection – SilentKnight 5129 Digital Alarm Communicator Transmitter User Manual
Page 5: Ntroduction

150805
1
S
ECTION
1
I
NTRODUCTION
The Silent Knight Model 5128/29 is a low-cost slave communicator that meets the requirements for UL 864,
NFPA 72 Fire Alarm Systems for Central Station Service and NFPA 72 Remote Supervising Station Fire
Alarm Systems.
1.1
Features
•
Compatibility with the Security Industry Association (SIA) reporting format and several other standard
reporting formats.
•
Four channel (zone) inputs for system status reporting: fire alarm (channel or zone 1); system trouble–
channel 2 (or zone 2); supervisory–channel 3 (or zone 3); and miscellaneous–channel 4 (or zone 4).
•
Optional two-number dialing with same or different account codes and reporting formats. Alarms,
troubles, and tests can be programmed to be reported to either or both numbers.
•
Programmable as rotary-only or as Touch-Tone/rotary dialing.
•
Built-in dual phone line-seizure circuit.
•
Dual phone line monitor circuits.
•
Transient voltage protection of phone lines.
•
Built-in audible trouble buzzer.
•
One relay output, programmable for alarm, trouble conditions, or trouble excluding low AC.
•
Light-emitting diodes (LEDs), visible from front of enclosure, indicating: trouble condition (yellow);
presence of DC power (green), phone line 1 trouble (red); and phone line 2 trouble (red).
•
Easy, English-language programming using Model 5230 Remote Annunciator.
•
Fuseless design, 24 VDC.
•
Electrically erasable read-only memory (EEPROM) for nonvolatile storage of all programmable option
data. Eliminates the need to reprogram the communicator if power is lost.
•
Built-in watchdog circuit that monitors the operation of the 5128/29 and resets the communicator if a fault
is detected.
•
Active high or contact closure input.
•
Model 5129 can directly monitor control panel’s primary power.
•
Compatibility with many Underwriters Laboratories (UL) Fire Listed receivers. (See Section 1.3 for list.)
•
Model 5128 housed in 8-5/8" x 4" x 1-3/8" enclosure for mounting inside control panel.
•
Model 5129 housed in a 10" x 10" metal enclosure.