beautypg.com

Introduction, General safety considerations, Eneral – Shellab SCO6AD User Manual

Page 5: Afety, Onsiderations

background image

5 |

P a g e

INTRODUCTION

Thank you for purchasing a Sheldon SCO6AD High-Heat Decontamination CO

2

incubator. We

know that in today’s competitive market place, customers have many choices when it comes to
constant temperature equipment. We appreciate you choosing ours. Our continued reputation as a
leading laboratory product manufacturer rests with you. Sheldon Manufacturing, Inc. stands behind
our products and want to let you know we are here if you need us.

These incubators are intended for laboratory, industrial, and educational microbiological
applications. These incubators are not intended for use in hazardous or household locations.

Before you use the SCO6AD read this entire manual carefully to understand how to install, operate,
and maintain the incubator in a safe manner. Keep this manual available for use by all operators.
Ensure that all operators are given appropriate training before the incubator begins service.

G

ENERAL

S

AFETY

C

ONSIDERATIONS

Note: Failure to follow the guidelines and instructions in this manual may create a protection

impairment by disabling or

interfering with the unit’s safety features. This can result in injury

or death.

Your SCO6AD and its recommended accessories are designed and tested to meet strict safety
requirements. It is designed to connect to a power source using the specific power cord type
shipped with the unit.

For continued safe operation of your incubator, always follow basic safety precautions including:

Always plug the incubator power cord into an earth grounded electrical outlet that conforms
to national and local electrical codes. If the incubator is not grounded properly, parts such
as knobs and controls can conduct electricity and cause serious injury.

Avoid damaging the power cord. Do not bend it excessively, step on it, or place heavy
objects on it. A damaged cord can be a shock or fire hazard. Never use a power cord if it is
damaged.

Always position the unit so that the user can quickly unplug it in the event of an emergency.

Do not attempt to move the unit while in operation or before the unit has cooled.

Do not stack SCO6ADs without use of a stacking rack.

Use only approved accessories. Do not modify system components. Any alterations or
modifications to your incubator can be dangerous and void your warranty.

Follow all local ordinances in your area regarding the use of this incubator. If you have any
questions about local requirements, please contact the appropriate agencies.