Shellab SCO6AD - Manual (Page 13)

13 | P a g e
INSTALLATION (CONTINUED)
L IFTING
The incubator should only be lifted by its bottom surfaces using proper heavy lifting machinery such
as, a forklift or pallet jack. Handles and knobs are inadequate for lifting or stabilization. The unit
should be completely restrained from tipping during lifting. Transporting the unit while lifted is not
recommended and may be hazardous. Remove all moving parts, such as shelves and trays, and
secure the door in the closed position prior to lifting or transporting the unit.
L EVELING
Make sure that the incubator is level and stable. Each incubator ships with four leveling feet. Insert
one leveling foot into each of the four holes in the bottom corners of the incubator. Stand the
incubator upright. Then, adjust the foot at each corner until the incubator stands level and solid
without rocking. To raise a foot, turn it in a counterclockwise direction; to lower a foot, turn it in a
clockwise direction.
Note: To prevent damage to the feet when moving the incubator, turn each of the four leveling feet
completely clockwise.