PRG Mbox Remote Manual 3.9 - Manual (Page 82)

76 MBOX ® REMOTE USER MANUAL
Editing Fixture Properties
Once a fixture has been added to a context, its properties can be edited.
Some of the fixture-level properties can be edited directly in the table when the Fixtures tab is selected. These are:
+ Patch tab: universe/device, address, group
+ Layout tab: X position, Y position, and rotation.
+ Physical tab: name
Other fixture-level properties can only be edited using the Edit Fixture window. The window can be used to edit a
single fixture or multiple fixtures at once, if multiple fixtures are selected before opening.
The Edit Fixture window also allows some profile-level properties to be changed without affecting the referenced
profile. In other words, these profile-level property settings can be unique to the selected fixture(s). The profile
reference can also be swapped to another profile. The Edit Profile Instead button provides access to all profile-level
properties. (Refer to
"Editing Fixture Profiles" on page 93.)
Pixel data is displayed in the window, but cannot be edited. However, it is possible to apply parked pixel overrides to
existing pixels using the overrides tab. To add more parked pixels, use the Edit Profiles feature. Refer to
"Editing
Fixture Profiles" on page 93.
Patch Layout Physical
Profile-Level Properties
(comes from profile) Fixture-Level Properties
(applies to fixture or selected fixtures)
Pixel Arrangement Pixel Data Pixels/Profile/overrides Table
(cannot be edited here) (cannot be edited here)
Click to edit profile
instead of patched fixture