PRG Mbox Remote Manual 3.9 - Manual (Page 76)

70 MBOX ® REMOTE USER MANUAL
Re-Addressing Fixtures
When fixtures are first placed onto a context, they are automatically given an address as explained in "Addressing
Fixtures" on page 67. If the patch needs to change, however, fixtures can be quickly re-addressed using one of three
methods:
+ Patch table.
+ Re-Address Fixtures window.
+ Sequential re-addressing feature.
Each of these methods is explained below.
Patch Table
A fixture’s universe and address can be edited directly in the Patch table. This is useful when re-addressing a single
fixture.
To edit patch in the Fixture table:
Step 1. At right side of window, select Fixtures tab.
Step 2. At Patch tab, double-click on universe (univ) or address (addr) field.
Step 3. Make changes as required.
Note: To make changes to multiple fixtures at the same time, use the Re-Address Multiple Fixtures window. See
instructions below.