PRG Mbox Remote Manual 3.9 - Manual (Page 77)

MBOX ® REMOTE USER MANUAL 71
Re-Address Multiple Fixtures Window
The Re-Address Multiple Fixtures window can be used to quickly re-address a large group of fixtures.
To assign a new starting point using Re-Address Fixtures window:
Step 1. At right side of window, select Fixtures tab.
Step 2. At Patch tab, select multiple fixtures (using cmd or shift), then double-click any selected line to open Re-
Address Multiple Fixtures window.
Step 3. At From Address field, enter new starting address. Also enter any changes to universe in the Universe field.
Step 4. Do one of the following:
a. Click Auto Renumber button to renumber the selected fixtures. This method will fix any overlap
conflicts in the process.
b. Click Commit to renumber the selected fixtures without fixing any overlap conflicts. (Conflicts will be
noted in the table after the window is closed.)
Multiple Fixtures Selected
Selection Information
Original Addressing and
New (Edited) Addressing
Re-Address Window
Reverts to original settings
Renumbers fixtures
Renumbers fixtures without fixing conflicts
and fixes conflicts
Conflicts (if any)
Conflicts