Keri Systems BioPointe - Manual (Page 84)

Biopointe Central User’s Manual
Appendix C 80
57 INVALID_PIN_NUMBER 0x38 PIN number must not be zero during
enrolment
58 NO_PIN_WRITTEN 0x39 No PIN was registered for this User
59 ERROR_ATTEMPT_TO_USE_PIN_WITH_FP 0x3A User was already fingerprint-enrolled
60 PIN_ALREADY_ASSIGNED_TO_USER 0x3B User was already Card/PIN enrolled
61 CAPACITY_OF_FP_ENGINE_REACHED 0x3C Capacity of fingerprint engine has
reached
62 WIEGAND_CODES_MISCOMPARE 0x3D Mismatch detected during comparison
of the Wiegand codes
63 WIEGAND_CODES_NOT_WRITTEN 0x3E Wiegand codes has not been written yet
for Card user
64 INVALID_PARAMETER_SENT_TO_DEVICE 0x3F An invalid parameter was passed in and
sent to the Reader
65 AUTHENTICATED_SEQUENCE_WAS_NOT_STARTED 0x40 The authentication sequence has not
been initiated yet
66 AUTHENTICATED_SEQUENCE_HAS_EXPIRED 0x41 The authenticated sequence has already
expired by its timeout.
67 LOG_DATE_NOT_FOUND 0x42 When requesting for log record to be
sent starting from a specific date, this
date was not found.
68 GAIN_AND_EXPOSURE_NOT_WRITTEN 0x43 The engine gain and exposure values for
the particular user were not written.
69 WRITE_FLASH_PROHIBITED 0x44 Not permitted to write to the data flash
because it has already been written.
Used for log records only.
70
LOG_DATE_TO_SET_LATER_THAN_LAST_SENT_D
ATE
0x45 This error will occur during pointing the
log upload pointer to a specific date, if
the desired date is later the date of the
last record sent.
71 JOB_CODE_DOES_NOT_EXIST 0x46 -
72 EXCEPTION_LIST_FULL 0x47 -
73 NO_JOB_RECORDS_IN_DEVICE 0x48 -
Specific errors related to the Fingerprint Engine
1 M2ERROR_FLASH_OPEN 0x51 Command from main memory or host to
access flash memory failed due to
problem(s) in flash memory
2 M2ERROR_SENSOR_OPEN 0x52 Failed due to optical unit
3 M2ERROR_REGISTER_FAILED 0x53 Registering fingerprint failed
4 M2ERROR_VERIFY_FAILED 0x54 Verifying fingerprint failed
5 M2ERROR_ALREADY_REGISTERED_USER 0x55 UserID already exists
6 M2ERROR_USER_NOT_FOUND 0x56 UserID is not found in FP database
7 M2ERROR_INVALID_PASSWORD 0x57 Password of Master is incorrect
8 M2ERROR_TIMEOUT 0x58 Failed to capture fingerprint in preset
time
9 M2ERROR_DB_FULL 0x59 FP database has insufficient space to
enroll a new user
10 M2ERROR_DB_WRONG_USERID 0x5A Failure in removing or verifying
unregistered user