Keri Systems BioPointe - Manual (Page 72)

Biopointe Central User’s Manual
Appendix A 68
Appendix
Appendix A
List of Log Record States
Table 4.6(a) to 4.6(f) lists the different class of log records.
Logs can be generally classified into Time-Attendance logs, Failed Transaction logs and Trace
logs.
Time-Attendance logs describe the attendance status of the user when they have their fingerprint
or card successfully matched at the Reader.
Failed Attempts logs describe the failure status of the user when they did not have their fingerprint
or card successfully matched at the Reader.
Trace logs traces specific events (or trace events) that happened at the Reader such as when the
door was opened or when the alarm was activated. Trace events are classified into the following
types:
• Door and Tamper Switch Events
• Alarm Events
• System Power Up
• Setup Mode Events
Time-Attendance logs are always recorded. On the other hand, Failed Attempts and Trace logs can
be disabled so that these events will not recorded even when it happened. Disabling of Failed
Attempts and Trace events can only be done at the Reader.
Each type of log is differentiated from the other by an identifier. The identifier, in this release of
the library is referenced by the variable, EnterLeaveStatus in the log record structure.
Table 4.6(a): Time Attendance
Description (according to display types) Identifier
(hex) Identifier
(dec)
‘Welcome’ Attd ( 6
Levels) Attd ( 2
Levels) Attd /
Access Attd /
Access V1
1 0x01 1 Welcome Attendance
In In Attendance -
2 0x02 2 - Leaving
Out Out Access
Control Access
Control
3 0x03 3 - Early
Leave - - -
4 0x04 4 - Going Out - - -
5 0x05 5 - Return - - -
6 0x06 6 - Others - - -
7 0x07 7 - - - - In
8 0x08 8 - - - - Out