Keri Systems BioPointe - Manual (Page 75)

Biopointe Central User’s Manual
Appendix A 71
Table 4.6(e): Setup Mode Events (Trace Event)
Identifier
(hex) Identifier
(dec)
Description
1 0xA0 160 Setup Mode Entered
2 0xA1 161 Setup Mode Exited
3 0xB1 177 A user’s fingerprint was changed
4 0xB2 178 A user was added
5 0xB3 179 A user was deleted
6 0xB4 180 A Master was added
7 0xB5 181 A Master was deleted
8 0xC0 192 Device date and time was changed
9 0xC1 193 Door Configuration was changed
10 0xC2 194 Alarm Configuration was changed
11 0xD0 208 A Card/PIN was changed
12 0xD1 209 Door secure – The door is configured to always locked.
13 0xD2 210 Door Unsecured – The door control was set to always unlocked.
14 0xD3 211 Door Normal – The door is configured to be “Disable” i.e. Door will
unlock upon successful verification.
Setup Mode Events record critical events that happen in the setup mode.
When accessing the setup mode, the event, [Setup Mode Entered] will be recorded. When the user
subsequently quits from the setup mode, the event, [Setup Mode Exited] will be recorded.
When the supervisor is in the setup mode, he may add or delete a user, change the date and time,
change the alarm configuration or change the door configuration. Each of these events (as listed in
the table above) will be recorded.
Table 4.6(f): Failed Attempts
Identifier
(hex) Identifier
(dec)
Description
1 0xE7 231 Failed matching (for users registered with fingerprint)
2 0xE8 232 Failed matching (for users registered with card)
3 0xE9 233 Failed matching (for users registered with card/PIN)
4 0xEA 234 ID not found in device database
5 0xEB 235 Fingerprint match could not be found using partial search
6 0xEC 236 Matching was aborted
Failed Attempts logs comprise the events in the table above. Each event describes the reason for
the failure to achieve a successful authentication.