Keri Systems BioPointe - Manual (Page 55)

Biopointe Central User’s Manual
Advance Features 51
NOTE:
Once the modem is manually connected, the modem will stay connected until you have manually
disconnected the modem or you have terminated the Biopointe Central application. So remember
to disconnect modem after use.
To start the connection to the Biopointe device through modem :
(1) Select the device ID that is configured as a modem communication channel.
(2) Click on the Connect button to start dialing up.
(3) Once connected, the status will show “Connected to remote station”.
To disconnect from the Biopointe device through the modem:
(1) Click on the Disconnect button to start dialing up.
(2) Once disconnected, the status will show “Connection terminated.”.
G. Device Log Management System
This feature allows administrators to control the uploading of event log records from multiple devices,
generate event log reports and export the log records to ASCII text file. All these features can also be found
in the Device Management System. However, in the case when administrator want to control the access on
some of the logon user from accessing the Device Management System, but still allow the user to manage
the log records, then the administrator can disable to Device Management System and enable the Device
Log Management System.
To upload event log records from the device:
(1) Select Device Log Management System from the Tools drop-down menu.
n