Keri Systems EntraGuard Bronze Quick Start - Manual (Page 31)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-001 Rev. J
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 31 of 32
Telephone Entry
Quick S
tart Guide
Set Call Forwarding
Telephone Number
• Press .
• Press – the desired
forwarding telephone number (up to 20 digits).
• Press . The unit emits a short high-pitched tone to indicate
the telephone number has been accepted. A high-low tone is
emitted if an invalid telephone number has been entered.
Enable Call Forwarding
• Press .
• Press . The unit emits a short high-pitched tone to indicate
call forwarding has been enabled.
Disable Call Forwarding
• Press .
• Press . The unit emits a short high-pitched tone to indicate
call forwarding has been disabled.
Set Maximum Connection
Time
Default = 60 seconds
• Press .
• Press – the desired maximum connection time.
• Press . The unit emits a short high-pitched tone to indicate
the connection time has been accepted. A high-low tone is
emitted if an invalid connection time has been entered.
Hold Open Gate 1 –
Fixed Period of Time
• Press .
• Press – the desired maximum connection time, in
minutes.
• Press . The unit emits a short high-pitched tone to indicate
the gate hold open time has been accepted. A high-low tone is
emitted if an invalid gate hold open time has been entered.
Programming Command Instructions