Keri Systems EntraGuard Bronze Quick Start - Manual (Page 29)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-001 Rev. J
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 29 of 32
Telephone Entry
Quick S
tart Guide
Delete all Entry Codes
• Press .
• Press . The unit emits a short high-pitched tone to indicate
all entry codes have been deleted. A high-low tone is emitted if
an invalid entry code has been entered.
Reset the EntraGuard
Bronze Unit
• Press .
• Press . The unit emits a short high-pitched tone to indicate
the unit has been reset.
Set the Programming
Mode Entry Code
Default = 999999
• Press .
• Press – the desired six-digit
programming code.
• Press . The unit emits a short high-pitched tone to indicate
the entry code has been accepted. A high-low tone is emitted if
an invalid entry code has been entered.
Set the Ring Mode
Default = Type 1
• Press .
• Press – the desired ring mode.
- Type 1: three short rings - long pause
- Type 2: two medium rings - long pause
• Press . The unit emits a short high-pitched tone to indicate
the ring mode has been accepted. A high-low tone is emitted if
an invalid ring mode has been entered.
Set the Maximum Number
of Rings
Default = 6
• Press .
• Press – the desired number of rings.
• Press . The unit emits a short high-pitched tone to indicate
the number of rings has been accepted. A high-low tone is
emitted if an invalid number of rings has been entered.
Programming Command Instructions