Keri Systems EntraGuard Bronze Quick Start - Manual (Page 30)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-001 Rev. J
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 30 of 32
Quick S
tart Guide
Telephone Entry
Set Gate 1 Relay Access
Code
Default = 9
• Press .
• Press – the desired relay access code.
• Press . The unit emits a short high-pitched tone to indicate
the access code has been accepted. A high-low tone is emitted
if an invalid access code has been entered.
Set Gate 1 Relay Timeout
Default = 5 seconds
• Press .
• Press – the desired relay timeout value.
• Press . The unit emits a short high-pitched tone to indicate
the timeout value has been accepted. A high-low tone is
emitted if an invalid timeout value has been entered.
Set Gate 2 Relay Access
Code
Default = 2
• Press .
• Press – the desired relay access code.
• Press . The unit emits a short high-pitched tone to indicate
the access code has been accepted. A high-low tone is emitted
if an invalid access code has been entered.
Set Gate 2 Relay Timeout
Default = 5 seconds
• Press .
• Press – the desired relay timeout value.
• Press . The unit emits a short high-pitched tone to indicate
the timeout value has been accepted. A high-low tone is
emitted if an invalid timeout value has been entered.
Programming Command Instructions