Keri Systems EntraGuard Bronze Quick Start - Manual (Page 25)

EntraGuard Bronze
1530 Old Oakland Road, Suite 100 01911-001 Rev. J
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Web: http://www.kerisys.com E-mail: [email protected]
Page 25 of 32
Telephone Entry
Quick S
tart Guide
5.3.18 Hold-Open Gate 2
The Hold-Open Gate 2 command allows you to immediately activate the gate 2 relay for the
specified period of time. The time range is from 1 to 99998 minutes (approximately 69.5 days). If
no value is entered, Gate 2 remains open until a Close Gate 2 command is issued (see “Close Gate
2” on page 26). Once the command is issued, the gate is opened immediately.
Perform the following to hold gate 2 open for a finite period of time.
1. Press .
2. Enter the desired gate 2 hold-open value – .
3. Press to lock in the gate 2 hold-open value. The unit emits a short, high-pitched tone to
indicate the gate 2 hold-open value has been accepted. The unit emits a short, high-pitched tone
followed by a low-pitched tone if the gate 2 hold-open time has been rejected.
EXAMPLE: Enter the following to hold gate 2 open for “5” minutes.
4. You can now enter another program command or press to exit programming mode.
Perform the following to hold gate 2 open indefinitely.
1. Press .
2. Press to hold-open gate 2 indefinitely. The unit emits a short, high-pitched tone to indicate
the gate 2 hold-open command has been accepted. The unit emits a short, high-pitched tone
followed by a low-pitched tone if the gate 2 hold-open time has been rejected.
EXAMPLE: Enter the following to hold gate 2 open indefinitely.
3. You can now enter another program command or press to exit programming mode.