Corinex Global ADSL2+ User Manual
Page 95
94
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Access List
The Access List functions allows you to Allow or Ban any wireless client from
accessing the Gateway.
After enabling the Access List function by checking the Enable Access List
checkbox, select the requested functionality, which is described in the table below.
Method
Description
Allow
Wireless clients specified in the list will be allowed to connect to
the Gateway.
Ban
Wireless clients specified in the list will not be allowed to connect
to the Gateway.
After that, input the MAC adresses of the wireless clients in the format xx-xx-xx-
xx-xx-xx and click Add.
After you have entered the MAC addresses, you will see a screen similar to the one
below.
You can delete the MAC addresses from the list by checking the Delete checkbox
next to the MAC address and clicking Apply. If you want to delete all the MAC ad-
dresses from the list, select Delete All and click Apply.
After the configuration, click Apply. To enable the new settings you will have to
restart the access point. Please go to the System Commands section in the Tools
tab as shown below and click on Restart Access Point.