Corinex Global ADSL2+ - Manual (Page 24)

23
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
4 Corinex ADSL2+ Wireless Gateway G
Configuration
4.1 Overview
For your convenience, use the Corinex ADSL2+ Wireless Gateway G web-based
utility to configure it. This chapter will explain all of the functions of this utility. The
utility can be accessed via Microsoft Internet Explorer, Netscape Navigator, Mozilla
Firefox or other web browsers to set up Ethernet, Wireless, or USB computer
connections to the Corinex ADSL2+ Wireless Gateway G. This utility has a consistent
design for all of its screens. It consists of screen selection tabs on the top part of
screen, menu on the left side and the display screen.
NOTE: The appearance of the user interface screenshots displayed in the
following part of this document may vary due to the firmware version currently
available in your device. It is recommended that you check for the latest firmware
version on the Corinex web site:
www.corinex.com .
After opening the default gateway’s IP address 192.168.1.1 in your internet browser,
the authentication screen appears. Please enter the username admin and the
password admin in order to get to the main screen.
Tabs
Screen
As you click on the selection tabs, different screens will be displayed.