Corinex Global ADSL2+ - Manual (Page 51)

50
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
8. Click the Apply button to complete the connection setup. This will temporarily
save this connection.
9. To make the change permanent, click on Save all settings in the left menu.
10. For connection, click on Connect.
A description of the CLIP setting options is described in the following table:
Field Description
IP Address IP address of the CLIP connection provided by your ISP.
Mask Subnet mask provided by your ISP.
ARP Server Address Resolution Protocol (ARP) server
Default Gateway If checked, this connection becomes the default gateway
to the Internet.
The VLAN Settings include the options showed in following table:
Field Description
Sharing This is where you enable/disable sharing. The VLAN needs
to be selected to create VLAN.
VLAN ID VLAN Identification
Priority Bits Priority is given to a VLAN connection from 0-7, 0 means
highest priority.
The following table describes the options of the PVC Settings:
Field Description
PVC Permanent virtual circuit. A fixed virtual circuit between
two users: the public data network equivalent of a leased
line. No call setup or clearing procedures are needed.
VPI Virtual path identifier
VCI Virtual channel identifier. 16-bit field in the header of an
ATM cell. The VCI, together with the VPI, is used to iden-
tify the next destination of a cell as it passes through to
the ATM switch. It is sometimes called virtual channel
connection.