Corinex Global ADSL2+ - Manual (Page 73)

72
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
The Custom IP Filters function allows creation of up to 20 custom IP filtering entries
to block specific services or applications based on:
• Source/Destination IP address and Netmask
• TCP Port (ranges supported)
• Protocol:
•
TCP
• UDP
• TCP and UDP
• ICMP
• Any
In the table below you can find the description of the Custom IP Filters page.
Field Description
Filter Name Name of the IP filter rule you are about to create.
Enable The Enable button is checked by default, meaning this rule
is applied when you click on the Apply button
Source IP Since IP filtering is for outgoing traffic, the source IP is the
IP address on your LAN side that you want to block net-
work traffic from.
Source Netmask Netmask of the source IP on your LAN side.
Destination IP You can define the destination IP address to which your
source IP will be banned the access. Enter “0.0.0.0” for
all.