Corinex Global ADSL2+ User Manual

Page 78

Corinex ADSL+ Gateway G Configuration

Corinex ADSL2+ Wireless Gateway G

Field

Description

Enable Bridge
Filters

Enable Bridge Filters button allow the user to enable or dis-
able bridge filtering. It can be set/unset during any add/edit/
delete operation. It can also be set/unset independently by
just pressing the Apply button.

Enable Bridge
Filter Management
Interface

When checked, it enables the Bridge Filter Management
Interface field.

Select LAN

Select your LAN group.

Bridge Filter
Management
Interface

You can choose from Ethernet, USB, and WLAN. .

SRC MAC

The source MAC address. It must be in a xx-xx-xx-xx-xx-
xx format, with 00-00-00-00-00-00 as “don’t care”. Blanks
can be used in the MAC address space, and would be
considered also as “don’t care”.

SRC Port

Source port. You can choose from Any, Ethernet, USB, and
WLAN.

Dest MAC

The destination MAC address.

Dest Port

Destination port. You can choose from Any, Ethernet, USB,
and WLAN.

Protocol

You can choose from the following options: PPPoE Session,
PPPoE Discovery, IPX - Ethernet II, RARP, IPv6, IPv4, and
Any.

Mode

There are two modes: Deny and Allow.

4.4.15 Web Filters

Web Filters allow you to manage the type of web content that passes through your
gateway.
The following content types are disabled by default:

• Proxy Server
• Cookies
• Java Applets
• ActiveX Controls
• Pop-Ups

To enable, simply check Enabled, then click Apply.