Corinex Global ADSL2+ User Manual
Page 85
84
Corinex ADSL+ Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Note: If no IP addresses are specified within the IP Access List, the access
control list will be disabled until the first IP address is added.
Use the following procedure to enable Access Control and add an WAN IP address
and a LAN IP address to the access control list.
1. Check Enable Access Control to enable the feature. This will enable the IP
Access
List
field.
2. You can select an IP from the IP Access List, or enter a new IP and check Add.
3. Change the LAN and/or WAN configurations of the IP address.
4. Click Apply.