Cabletron Systems 6E133-25 - Manual (Page 55)

Accessing Local Management
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 5-7
5.4 ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Password screen,
Figure 5-3 . Whenever a connection is made to the 6E12X-26 and
6E13X-25 the Password screen displays. Before continuing, the user must
enter a password which is compared to the previously stored passwords.
The level of access allowed the user depends on the password. To set or
change passwords refer to
Section 5.8 . The following steps describe the
procedure to access Local Management.
1. Turn on the terminal. Press ENTER (this may take up to four times,
because the COM port of the 6E12X-26 and 6E13X-25 auto-senses the
baud rate of the terminal) until the 6C105 Local Management
Password screen,
Figure 5-3 , displays.
Figure 5-3 Local Management Password Screen
2. Enter the Password and press ENTER. The default Super-User access
password is “public” or press ENTER.
6C105 LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc, 1997
Enter Password:
1960_12
Event Message Line