Cabletron Systems 6E133-25 - Manual (Page 147)

RMON Statistics Screen
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide 5-99
5.28.2 Using the Clear Counters Command
To reset all the statistics counters of the selected interface to zero, perform
the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command.
2. Press ENTER, the counters for the selected interface are reset to zero.
5.29 RMON STATISTICS SCREEN
RMON statistics for each interface, on a interface-by-interface basis, are
viewed through the RMON Statistics screen shown in
Figure 5-35 .
Access the RMON Statistics screen by using the arrow keys to highlight
the RMON STATISTICS menu item on the Module Statistics Menu
screen and pressing ENTER. The RMON Statistics screen displays.
Figure 5-35 RMON Statistics Screen
NOTE
The RMON Statistics screen provides statistics for all front
panel Ethernet interfaces, and any Fast Ethernet Interface
Modules installed in the 6E12X-26. RMON Statistics are not
gathered for an HSIM installed in the 6E13X-25.
Firmware Revision: XX.XX.XX
RMON Statistics
2269_65
BOOTPROM Revision: XX.XX.XX
RETURN
Module Type: 6E122-26
Slot Number: X
RMON Index: X
Data Source: IfIndex.1
Drop Events:
Collisions:
Broadcast Pkts:
Multicasts:
CRC Align Errors:
Undersized Pkts:
Oversized Pkts:
Fragments:
Jabbers:
0
0
0
0
0
0
0
0
0
6E122-26 LOCAL MANAGEMENT
Event Message Line
Index: [XX] CLEAR COUNTERS EXIT
Owner: monitor
Status: valid
Total Packets:
Total Octets:
64 Octets:
65 - 127 Octets:
128 - 255 Octets:
256 - 511 Octets:
512 - 1023 Octets:
1024 - 1518 Octets:
0
0
0
0
0
0
0
0