Cabletron Systems 6E133-25 - Manual (Page 120)

Chapter 5: Local Management
5-72 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
5.21 SYSTEM RESOURCES SCREEN
The System Resources screen, Figure 5-27 , provides information
concerning the processor, the amount of FLASH memory, DRAM, and
NVRAM that is installed and how much of that memory is available.
Access the System Resources screen from the Module Specific
Configuration Menu screen by using the arrow keys to highlight the
SYSTEM RESOURCES menu item and pressing ENTER. The System
Resources screen displays.
Figure 5-27 System Resources Screen
The following briefly explains each field of the System Resources screen.
Module Uptime (Read-only)
The time in days/hours/minutes that the module has been continuously
running.
CPU Type (Read-only)
Indicates the microprocessor used in the 6E12X-26 and 6E13X-25.
Firmware Revision: XX.XX.XX
System Resources
1960_23
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : 4 MB
DRAM Installed: 16 MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HT 75Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Module Type: 6E122-26
Module Uptime: X Days XHrs XMins
6E122-26 LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN EXIT